|
|
Post by newcathunter on May 13, 2016 9:43:03 GMT -5
Hi everyone my question it's how to recite a fishing rod to make look like a new I something like that's but a same time cheap way to DIY some recommendations we appreciate any advice to do this
|
|
|
|
Post by Skyline1506 on May 13, 2016 16:05:56 GMT -5
Are you taking it all the way down. Like stripping the coating and paint off, removing the eyes and handle. Down to bare blank or just a repainting
|
|
|
|
Post by Skyline1506 on May 13, 2016 16:13:07 GMT -5
If you are just putting new finish on it. A precat urethane works great. Mudhole.com carries that and a whole line of rod building and reworking materials. As far as handle if it were me I would para wrap them really spruces them up. I have done a few. I don't have a whole lot of experience with mudholes liquids. I work for a company that makes and sells industrial coatings so I just use our stuff. But I do know they come highly recommended across the rod building community
|
|
|
|
Post by newcathunter on May 13, 2016 19:44:24 GMT -5
I'm thinking only to put new layer of coats and replace the reel seat let me check mudhole.com and thks for the replied
|
|
|
|
Post by Skyline1506 on May 14, 2016 7:06:01 GMT -5
No problem. Let us know how it goes
|
|
|
|
Post by newcathunter on May 14, 2016 20:41:27 GMT -5
This its the rod why try to fix its a old calstart 50# especial |
|
